|
Post by hilts111 on May 23, 2020 8:42:28 GMT -5
Hello
New to the TGC2019 designer but probably like a lot of other people have been trying it out while reasons for leaving the house are limited!
Have been experimenting with Chad's software to import LIDAR/OSM data and it works really well.
I'm trying to reproduce a course on the south coast of England which has a cliff edge. Using the Highland theme to get some sea off the coast (and some usable plants/trees), I always end up with the sea on a wrong edge of the terrain - so the cliffs from the LIDAR go down to a landscape instead of seascape. I can change the backdrop to get sea all around the terrain but I don't want the course on an island.
Is there a way of rotating the terrain in the designer or Chad's software?
Sorry if this is obvious but I have not found anything on the forums.
|
|
|
Post by hilts111 on May 23, 2020 13:25:26 GMT -5
Looks like I've found it!
There's a rotation option on the Course Tools tab. Played around with some 45 and 90 degree rotations and found one that worked for me.
|
|
|
Post by sirish19 on Aug 13, 2020 8:45:59 GMT -5
Looks like I've found it!
There's a rotation option on the Course Tools tab. Played around with some 45 and 90 degree rotations and found one that worked for me.
m Will that not screw up the LiDAR? I have used the shift function a bit when I found the LiDAR and OSM were a bit off to try to make an adjustment and I thought that the rotate might do the same thing. I generally try to make sure that the bunkers line up to ensure that it is accurate.
|
|