|
Post by Riotous on Jun 2, 2019 3:42:13 GMT -5
I know the width of the green fringe can be adjusted within the ‘Course settings’ and there’s an option to change it on each individual hole, but if I adjust the width in either drop down box then every green width on the course changes. This wouldn’t be a problem but I’ve got 15 holes with a nice tight fringe and 3 with a medium fringe, and I’m unable to get them all the same width. Am I missing something? Thanks in advance
|
|
|
Post by b101 on Jun 2, 2019 5:11:39 GMT -5
Easiest way is to spline your greens rather than using shapes - as I assume you are doing? Then, highlight a spline point, go to edit and then you'll see an option with seconday width. Just use the same width each time and all good. If you aren't using splines, I suggest you start; it's much better once you get used to it.
|
|
|
Post by Riotous on Jun 3, 2019 5:24:15 GMT -5
Worked a treat, thanks. Splines from here on in
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 3, 2019 7:01:31 GMT -5
I agree with spline comments above. Sometimes if I want to put in a green that looks like one of the available shapes, I will lay down the shape and trace around it, followed by deleting the shape before filling the spline.
|
|
|
Post by ErixonStone on Jun 3, 2019 8:35:12 GMT -5
If you've created your greens with brush shapes, the fuzziness of the brush edges will affect the fringe width.
|
|