|
Post by b101 on Jun 1, 2019 14:28:09 GMT -5
Hi all, I think I might have seen this on a stream (one of mattf27, VctryLnSprts or Crazycanuck1985 maybe?), but I'm having an issue where the light rough I'm putting down around a tee box is immediately deforming. I've deleted all of the heavy rough within about 50 feet of it and there are no other splines, so no ideas other than moving the tee box somewhere else... I think I saw one of the above solve something like this using the red brush, but can't remember how. Any ideas? Thanks in advance! Ben
|
|
|
Post by Celtic Wolf on Jun 1, 2019 14:34:13 GMT -5
Have you tried splining your tee boxes and using the light rough as the secondary surface?
|
|
|
Post by b101 on Jun 1, 2019 14:55:58 GMT -5
Have you tried splining your tee boxes and using the light rough as the secondary surface? Yep, same thing happening
|
|
|
Post by TheDominator273 on Jun 1, 2019 15:08:14 GMT -5
Have a picture of what's happening?
|
|
|
Post by mattf27 on Jun 1, 2019 20:21:53 GMT -5
Assuming it's a large spot disappearing and not just getting wrinkled at the edges, that'd be a red-brush issue. Just run a little blue-brush sculpting around the area (to override the default landscaping if it's still untouched), then use the red brush to raise the land where the issue is happening. If it's done correctly, the land height shouldn't change (since the blue brush overrides the red one), but you'll have the rough texture generating properly.
|
|
|
Post by b101 on Jun 1, 2019 23:36:17 GMT -5
Assuming it's a large spot disappearing and not just getting wrinkled at the edges, that'd be a red-brush issue. Just run a little blue-brush sculpting around the area (to override the default landscaping if it's still untouched), then use the red brush to raise the land where the issue is happening. If it's done correctly, the land height shouldn't change (since the blue brush overrides the red one), but you'll have the rough texture generating properly. Thanks - it is the 'getting wrinkled at the edges' issue though . Splining has solved it at third time lucky, but I'd be interested to know what went wrong for next time if anyone knows. TheDominator273 - video below. You can see I delete all of the heavy rough and move other splines then it still happens... Exciting video, I know
|
|