|
Post by Timbr0_T on Sept 22, 2020 22:36:44 GMT -5
Delta Falls CC - not approved
Many autogen plants and grasses around teeboxes, fringes should be removed.
Light rough sculpting needs improvment, use fuzzy brushes.
Bunker sculpting needs improvement (for example hole 5 and 6 bunkers to the left and behind green)
Tree on fringe hole 6.
Too many blind tee shots
|
|
|
Post by Timbr0_T on Sept 22, 2020 23:02:22 GMT -5
Dane Country Club - not approved
Course appears to be almost entirely flat, even greens.
Sculpting around water needs smoothing.
|
|
|
Post by catcherman22 on Sept 22, 2020 23:40:37 GMT -5
Rolling Holls - Not Approved.... many of the same issues as your other two courses above.
|
|
|
Post by findingfairways on Sept 23, 2020 7:54:05 GMT -5
The Links at Devil's Run - not approved Sculpting and surfacing, magic crazy rivers. "Magic crazy rivers" is not a buzz word. this needs an explanation. I would love to see what you are talking about as far as bushes blocking tee shots. Also why remove trees, these cause for a more accurate tee shot lol...yikes
|
|
|
Post by b101 on Sept 23, 2020 7:59:30 GMT -5
"Magic crazy rivers" is not a buzz word. this needs an explanation. I would love to see what you are talking about as far as bushes blocking tee shots. Also why remove trees, these cause for a more accurate tee shot lol...yikes I'm not sure you've quoted the right post. If you have, I don't get what you mean.
|
|
|
Post by tpetro on Sept 23, 2020 8:12:13 GMT -5
The Origins Course (Tour) - Not Approved
Major surfacing issues
|
|
|
Post by findingfairways on Sept 23, 2020 8:32:44 GMT -5
Disney's world resort magnolia - not approved Clearly no effort was made in removal off trees and bushes blocking tee shots. Plants too close to playing surface. Sculpting issues throughout Examples? And trees are there so you have to hit a more accurate tee shot lol
|
|
|
Post by b101 on Sept 23, 2020 8:42:50 GMT -5
Disney's world resort magnolia - not approved Clearly no effort was made in removal off trees and bushes blocking tee shots. Plants too close to playing surface. Sculpting issues throughout Examples? And trees are there so you have to hit a more accurate tee shot lol Tee shot one: Fairway one:
It's not close and I'd have rejected it based on those two views alone. You have to take more care with planting.
|
|
|
Post by findingfairways on Sept 23, 2020 8:53:44 GMT -5
Examples? And trees are there so you have to hit a more accurate tee shot lol Tee shot one: Fairway one:
It's not close and I'd have rejected it based on those two views alone. You have to take more care with planting. Those bushes are so small not in the way at all lol
|
|
|
Post by tpetro on Sept 23, 2020 8:55:32 GMT -5
To add on to Ben's points, when you name a course after a real course and are (I assume) attempting to recreate it, you need to be very very careful. Take hole 2: In real life, 2 at Magnolia is a gentle dogleg right par 4 with trees a good 15-20 paces from the right edge of the fairway, and there are no trees on the left side. In your version, it's a 90 degree dogleg par 5 with trees about 6 inches from both sides of the fairway. This would be enough to not approve it even if the course was Tour-Worthy quality.
|
|
|
Post by b101 on Sept 23, 2020 9:00:02 GMT -5
Tee shot one: Fairway one:
It's not close and I'd have rejected it based on those two views alone. You have to take more care with planting. Those bushes are so small not in the way at all lol They are massive, completely in the way and you can't see where you are hitting because of them. You don't hit dead over a 6ft tall bush right in front of the tees in real life and you've clearly manually made the bush from the plants section (far left) far bigger than it normally would be, so I don't get where your so small comment is coming from. Here's the problem: you don't want to understand why this was rejected or learn from it. You want to rant because it was rejected. Please watch the video that I spent time making to help people in this sort of situation, otherwise we end up in a pointless circle of you getting courses rejected because you haven't tried to understand the criteria.
|
|
|
Post by mattf27 on Sept 23, 2020 9:04:48 GMT -5
Those bushes are so small not in the way at all lol They are massive, completely in the way and you can't see where you are hitting because of them. You don't hit dead over a 6ft tall bush right in front of the tees in real life and you've clearly manually made the bush from the plants section (far left) far bigger than it normally would be, so I don't get where your so small comment is coming from. Here's the problem: you don't want to understand why this was rejected or learn from it. You want to rant because it was rejected. Please watch the video that I spent time making to help people in this sort of situation, otherwise we end up in a pointless circle of you getting courses rejected because you haven't tried to understand the criteria. Alternatively, if you didn't care to do any of these things, more power to you. But in that case, I'd ask that you stop wasting our time.
|
|
|
Post by findingfairways on Sept 23, 2020 9:49:39 GMT -5
Those bushes are so small not in the way at all lol They are massive, completely in the way and you can't see where you are hitting because of them. You don't hit dead over a 6ft tall bush right in front of the tees in real life and you've clearly manually made the bush from the plants section (far left) far bigger than it normally would be, so I don't get where your so small comment is coming from. Here's the problem: you don't want to understand why this was rejected or learn from it. You want to rant because it was rejected. Please watch the video that I spent time making to help people in this sort of situation, otherwise we end up in a pointless circle of you getting courses rejected because you haven't tried to understand the criteria. I'm trying to learn, I just find that a bush 1 ft high that isn't in the way is one problem. I'll take your feedback and watch the video. I spent a lot of time on this course. I'll try and do better. Thanks!
|
|
|
Post by b101 on Sept 23, 2020 9:51:51 GMT -5
They are massive, completely in the way and you can't see where you are hitting because of them. You don't hit dead over a 6ft tall bush right in front of the tees in real life and you've clearly manually made the bush from the plants section (far left) far bigger than it normally would be, so I don't get where your so small comment is coming from. Here's the problem: you don't want to understand why this was rejected or learn from it. You want to rant because it was rejected. Please watch the video that I spent time making to help people in this sort of situation, otherwise we end up in a pointless circle of you getting courses rejected because you haven't tried to understand the criteria. I'm trying to learn, I just find that a bush 1 ft high that isn't in the way is one problem. I'll take your feedback and watch the video. I spent a lot of time on this course. I'll try and do better. Thanks! At the risk of belabouring the point, they aren't 1ft high. If they were, we wouldn't be having this conversation. Stand next to the bush and press 'play from here' - that'll give you an idea of the actual height.
|
|
|
Post by ballysacorn4 on Sept 24, 2020 0:26:47 GMT -5
The links of coileach mor - not approved
Sculpting and Surfacing issues through out. Blind tee shots. Fairways and rough edges need smoothing out from the autoflatten feature
|
|