|
Post by retteach on Sept 15, 2023 19:43:49 GMT -5
Hey guys, Designing a green for Major and the green grid keeps disappearing about 2/3 of the way across the green as i move the curser so I can't see it to sculpt. The green is only about average size....located near water on the right.Never had this happen before.Thoughts?
|
|
|
Post by sandgroper on Sept 15, 2023 22:23:47 GMT -5
Move the pin?
|
|
|
Post by paddyjk19 on Sept 16, 2023 2:27:09 GMT -5
Or just put 4 pins, one in each corner as placeholders?
|
|
|
Post by wildy33 on Sept 16, 2023 2:28:24 GMT -5
Is it near close to another hole mate? Had it once when the waypoint of another hole ran in close proximity to the green and I lost a part of the green grid.
|
|
|
Post by bubbadave on Sept 16, 2023 12:30:24 GMT -5
Did you put a pin down and then later move the green waypoint? If so, it'll move the entire grid and part of the green won't be covered anymore. My advice is to always move your green waypoint to the center of the green before placing pins.
|
|