|
Post by oldgamer1 on Sept 17, 2022 17:11:20 GMT -5
Hi everyone, I'm new to the forums but I have a question. When I'm putting down my holes in the designer, I get automatic fairways after I put down the tees and holes. I can't find any way to eliminate this as I would like to create my own fairways, greens, bunkers and tee boxes with splines. I have tried delete the auto generated fairway but nothing seems to work.... any help would be greatly appreciated.
Thanks, Mike
|
|
|
Post by BaconJunkie1 on Sept 17, 2022 21:55:55 GMT -5
Go to the Settings tab then Course Settings>Fairway and set width to 0.0
|
|
|
Post by oldgamer1 on Sept 18, 2022 1:02:26 GMT -5
Nope, that didn't do the trick.... I already tried it but I tried it again a few times and I still get the fairway when I create a hole.
|
|
|
Post by paddyjk19 on Sept 18, 2022 2:14:57 GMT -5
Nope, that didn't do the trick.... I already tried it but I tried it again a few times and I still get the fairway when I create a hole. Sure it’s not just light rough, you need to turn that to 0.0 as well as greens, heavy rough and tees if you don’t want any automatically generated surfaces
|
|
|
Post by oldgamer1 on Sept 18, 2022 10:13:56 GMT -5
Well, I went through all of the rough settings and sure enough there was one that I didn't turn down to zero. I zeroed everything and it seemed to work fine. That was my only issue so I'm hoping to do a few courses.... I've been watching plenty of youtube so I'm excited to start!! Thanks everyone for all of your help!!!!
|
|