Lidar imports water & bunker brush?

[fuzzy26]

I am working on a little 9 hole course in Silver Bay, Mn.  For some reason when I pull the game into TGC 2019, there is a big strip of bunker brush, that starts outside of my mask and runs through holes 4 & 5.  Another thing, there is a big strip of rough brush outside my mask also (down below hole 3).  I also have a bunch of rough brush on the right corner of 4.  Then there is a bunch of water tables.  Is this all from the lidar or the metadata?  None of this stuff is on my OSM.  Just want to know if I am doing something wrong.
This is what I used for data.


USGS_LPC_MN_Arrowhead_B1_2011_1958_24_22_LAS_2016
USGS_LPC_MN_Arrowhead_B1_2011_1958_24_23_LAS_2016
USGS_LPC_MN_Arrowhead_B1_2011_1958_24_22_LAS_2016_meta
USGS_LPC_MN_Arrowhead_B1_2011_1958_24_23_LAS_2016_meta

Only my 2nd course, so still on the low end of the learning curve, so thank you for any help given.

[mal]

Have you started with a completely blank and flat template course file?

[fuzzy26]

Yes, I started with a blank file from TGC2019. Here is a picture from Golf Tools.
i.lensdump.com/i/IAfzkx.jpg

Here is the mask.
i.lensdump.com/i/IAfSlH.png

[mal]

I've never seen anything like this...

Since these splines do not exist in OSM, you must be using a course file you added features to in the designer before importing the OSM data onto.

Create and save a brand new course file that is completely blank and flat and use that.