|
Post by Riotous on Feb 7, 2020 8:06:26 GMT -5
Pretty sure I stupidly used the clear generator on the plot prior to starting the routing. Now the course is finished I want to plant trees around the perimeter, but I have Zero plant meter left and by turning up the trees to many within the environment section nothing happens.
Is there a way to reverse the clear generator function?
|
|
|
Post by 15eicheltower9 on Feb 7, 2020 9:18:51 GMT -5
I think what you're asking is can you delete the brush. And you can, but you have to find it. The easiest way would be to select any brush (heavy rough, fairway, bunker) click on it, go to multi select. If you zoom out and move around you'll see different brushes and objects being highlighted. You're looking for the pinkish redish brushes.
|
|
|
Post by Riotous on Feb 7, 2020 9:21:23 GMT -5
Thanks Justin, maybe I wasn’t clear, I want to mass plant trees
|
|
|
Post by ErixonStone on Feb 7, 2020 9:48:34 GMT -5
I think Justin's response is spot on. The clear generated trees command works just like the lay heavy rough surface command, and undoing that also follows the same process.
You have to find the brush that cleared the trees and delete that brush.
|
|
|
Post by Riotous on Feb 7, 2020 9:52:25 GMT -5
Sorry Justin, totally miss-interpretation on my behalf. What you’ve suggested sounds like the solution. I’ll give it a go and report back
Thanks chaps
|
|
|
Post by jwtexan on Feb 7, 2020 10:52:46 GMT -5
The guys above have you on the right track. Find the brushes and delete them, the auto-gen trees will come back.
|
|
|
Post by 15eicheltower9 on Feb 7, 2020 11:48:05 GMT -5
I think Justin's response is spot on. The clear generated trees command works just like the lay heavy rough surface command, and undoing that also follows the same process. You have to find the brush that cleared the trees and delete that brush. Yeah, that's worded way better.
|
|