Help with Code for Ivanhoe Club

[kvand]

Jun 24, 2019 23:00:25 GMT -5 arielatom said:

Played 5 holes before closing down TGC for the night. Looks very nice!

I do wonder if the front part of the 3rd fairway maybe needed a few more spline points or maybe that's just the shape it is?

. I’ll have a look at 3. I should have all of the splines...and them some. But I’ll check just is case. I also noticed a lot of sculpting and brush work that I missed. Kinda embarrassing...I’ll be fixing that as well. Thanks for giving it a play. Let me know what you think of the rest. I think I need to move one of the pins on 11 as well.

There seems to be a big difference on what I see in the designer on PC compared to the published course on PS4.

[Deleted]

I'm not really sure what brush work you mean because it looked pretty good There's usually some but not a lot of that to do for lidar courses.

[kvand]

Jun 25, 2019 10:03:43 GMT -5 arielatom said:

I'm not really sure what brush work you mean because it looked pretty good There's usually some but not a lot of that to do for lidar courses.

thanks for positive feedback. I noticed a lot of areas where I missed heavy rough with the brushes. I want to get those polished up. I did a good bit of refining the contours and shooting the fairway and green edges. I also had to move splines. At the fairway to green transition. The OSM does a pretty good job, but there is always some fine tuning. This has been a fun project so far. Can’t wait to get the Prairie added. Then we’ll have all 3 to play.

[Deleted]

It really depends on the course and how it's supposed to look imho. Some courses do really well with heavy rough brush everywhere, others not so much.

[nc019276435]

Jun 6, 2019 19:15:26 GMT -5 kvand said:

I am doing a second course in the North Chicago area called Ivanhoe Club. The Lidar is the exact same for the Wynstone course I am currently working on. I copied and tried using the same files that I used for Wynstone. Is that able to be done? I also received the following message in the tool when I tried to run it through. Any help would be greatly appreciated..



Processing: ARRA-IL_LakeCo_2007_000001.laz

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Using metadata: ARRA-IL_LakeCo_2007_000008.xml

Could not determine lidar projection, please report an issue and send this lidar and metadata

Alternatively, look for something called EPSG Value in Metadata and provide EPSG and Conversion to Meters (1.0 for Meters, Approximately 0.3048 for Feet

Hey, do you still have the course file?  I'm looking to make a few changes and work on getting the 27 holes.  My LiDAR data is being difficult and came across this.  Thanks!

[kvand]

Apr 13, 2020 2:03:05 GMT -5 nc019276435 said:

Jun 6, 2019 19:15:26 GMT -5 kvand said:

I am doing a second course in the North Chicago area called Ivanhoe Club. The Lidar is the exact same for the Wynstone course I am currently working on. I copied and tried using the same files that I used for Wynstone. Is that able to be done? I also received the following message in the tool when I tried to run it through. Any help would be greatly appreciated..



Processing: ARRA-IL_LakeCo_2007_000001.laz

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Using metadata: ARRA-IL_LakeCo_2007_000008.xml

Could not determine lidar projection, please report an issue and send this lidar and metadata

Alternatively, look for something called EPSG Value in Metadata and provide EPSG and Conversion to Meters (1.0 for Meters, Approximately 0.3048 for Feet

Hey, do you still have the course file?  I'm looking to make a few changes and work on getting the 27 holes.  My LiDAR data is being difficult and came across this.  Thanks!

Unfortunately, I do not. I typically remove all files once I get to a certain point in design with them. It saves space on my drives and is less tempting to go in and rerun the Lidar and lose all progress.  With that. I recently started a redo on this course. I switched over to Boreal them and have redone a lot scuplting. It is looking quite nice. I am currently on Hole #11 on the redo, and will them move onto the 3rd nine holes. From there, I hope to have different combinations of all 27 holes. I will try and get into the forum and post some progress pictures of the redo. 

[kvand]

Apr 13, 2020 2:03:05 GMT -5 nc019276435 said:

Jun 6, 2019 19:15:26 GMT -5 kvand said:

I am doing a second course in the North Chicago area called Ivanhoe Club. The Lidar is the exact same for the Wynstone course I am currently working on. I copied and tried using the same files that I used for Wynstone. Is that able to be done? I also received the following message in the tool when I tried to run it through. Any help would be greatly appreciated..



Processing: ARRA-IL_LakeCo_2007_000001.laz

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Problem looking up epsg with prj2epsg.org, try running the tool later.

Using metadata: ARRA-IL_LakeCo_2007_000008.xml

Could not determine lidar projection, please report an issue and send this lidar and metadata

Alternatively, look for something called EPSG Value in Metadata and provide EPSG and Conversion to Meters (1.0 for Meters, Approximately 0.3048 for Feet

Hey, do you still have the course file?  I'm looking to make a few changes and work on getting the 27 holes.  My LiDAR data is being difficult and came across this.  Thanks!

Are you still interested in working on this course? I can try and email you the file, if so.