Shifting North, South, East or West on TGC Tools with Lidar

[paddyjk19]

Hi,



I'm in the process of releasing a couple of RCR's but need a little help as the Lidar and OSM are not completely paired;



I've attached some photos to show what I mean on the HB Forum, on Chad's TGC tools app it says you can fine tune the positioning in two different places - on the first page and the second page, which one should I use and what kind of numbers would you recommend I start with? I'm about 1.5m off perfect with both my designs currently.



I've drawn measuring lines to show the distance and direction I'd like to shift the OSM map, I've also put the compass to show direction.



Please help me!



Many thanks!

[chadgolf]

Two options:

If you're importing new OSM, I recommend using the shift on the "Import Heightmap" tab. The values are in meters. So if you're lucky and it's all West->East, you would put 1.5 in the West->East to shift 1.5 meters east. or if it's South->North put -1.5 to shift 1.5 south.

If you're already planted or don't want to lose work, I recommend entering the same values in the first page, and then clicking "Shift Terrain". This will shift the ground underneath anything that's been planted/splines.

[paddyjk19]

Thanks Chad, that’s exactly what I needed deciphering!
I need to go about 2 metres SW so will put the same value in both and see where that leads me.

Thanks again for all your hard work on this