|
Post by cliffs on Aug 4, 2022 19:15:55 GMT -5
I play using the percentages of each club to control distances. I mapped out all my clubs in increments of 5%. 60-65% is the lowest on most clubs.
My problem - I have not changed any settings in the game but lately, when I adjust my aim marker for the percentage I want, it is the same strength no matter 100% or 60%. Example, my 5 iron will carry 204 yards and rollout to 212. When I bring the marker closer to me at 60% the ball goes the same distance as the 100% shot. Happens on all clubs.
I have tried with distance control off/on. Different levels of skill. Everything off/on. Nothing changes, my clubs all hit the same distance using percentages.
|
|
|
Post by twofor22 on Aug 8, 2022 16:25:48 GMT -5
That's odd. Mine go shorter if I bring the marker back shorter. I don't do it very often though, I usually control distance by altering loft and spin.
|
|
|
Post by martbloke on Aug 10, 2022 12:35:47 GMT -5
So are you doing a full swing even if you set it at 60%?
I'd guess you used to have the distance control aid on which would only go to where you set your marker (plus 5% overseeing) and you couldn't go above it. If that is off, you can set to 60% but you have to partial swing and stop your backswing in the white zone. If you go passed that and hit a full swing, it will go the distance of your backswing.
|
|