|
Post by Nate_0428 ππ» on Nov 9, 2020 9:14:14 GMT -5
Wondering if there is a way to raise/flatten tee boxes that are just a little off from the LiDAR import? Itβs only a few and they just need moved very little, so Iβd like to just flatten them as is instead of OSM move. I tried to do this and the grass and anything else from the import doesnβt move. Iβve got light rough floating above the tee box. Any help? Thanks!
|
|
obmar
Weekend Golfer
Posts: 117
|
Post by obmar on Nov 9, 2020 15:26:34 GMT -5
flatten a few inches, then raise a few inches back
|
|
|
Post by Nate_0428 ππ» on Nov 12, 2020 6:55:01 GMT -5
flatten a few inches, then raise a few inches back Iβm not sure I understand what you want me to try.. from what I can tell Any grass imported from LiDAR using Chads tool is static.. you can delete or change it in every way except elevation it seems. In my case Iβll have to build up the ground because otherwise the grass will be floating above.
|
|
obmar
Weekend Golfer
Posts: 117
|
Post by obmar on Nov 12, 2020 19:28:24 GMT -5
i took the flatten brush blue, round then set it to -6 inches then leave it and raise it to +0 inches
the result seems to flatten the area (levelling it) while leaving it alone elevation wise
|
|