|
Post by rhino4life on Mar 5, 2019 23:28:40 GMT -5
On a current design im playing with i layed out a hole and added a cart path (surface 1). I was messing around in the edit feature and was able to add a secondary surface (surface 2) which served as a border for my cartpath which was a different cart path texture. I move onto hole 2 and layed down the primary cart path surface. I then went to toggle secondary surface (like you would a fairway spline) and the only options there are rough, heavy rough, or clear. I spent 25 minutes dinking around trying to add this same border but now i dont recall how i did this the first time. What obvious thing am i missing?
|
|
|
Post by rhino4life on Mar 6, 2019 7:36:30 GMT -5
Adding photo
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 6, 2019 7:46:26 GMT -5
When you toggle surface and it gives you grass, go back one click and choose texture. You should be able to correct it that way.
|
|
|
Post by rhino4life on Mar 6, 2019 8:07:46 GMT -5
Not sure where grass comes into play. Grass is not a texture. Here i am on spline point, edit...and it shows my secondary surface width at 3.5. Apparently even if i wanted to change the current border im not sure how since surface 2 is not listed. The last pic is where i started my second hole cart path and only see rough and heavy rough options. I gotta be overlooking something so simple here.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 6, 2019 8:24:02 GMT -5
On that first screen, select swap textures.....i mean surface when you're editing the path while on a node.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 6, 2019 8:33:22 GMT -5
Also, lay down a section of surface 2 off to the side. Go to a node and edit it to the texture you want. That might fix it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 6, 2019 8:44:56 GMT -5
i was able to reproduce the issue, so now i'm lost as well...it's always something simple
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 6, 2019 8:50:25 GMT -5
I got it....use surface 3 as your path...it will give you the option to toggle surface 1 or 2
|
|
|
Post by rhino4life on Mar 6, 2019 9:15:40 GMT -5
Geez...I don't remember this being that big of a flustercluck. I will try this when I get home.
|
|